Language
BREATHER VALVE
Mod. 101 - 101/AC - 101/AA
These valves are designed to protect the reservoirs against excessive positive or negative (vacuum) pressures due to the loading or unloading operations and to the temperature variations. As the reservoir pressure exceeds the valve relief or vacuum setting, the pallets arise allowing the venting or the vacuum relieving of the reservoir.
-
Valves Mod. 101/AA
These valves are used when the setting values exceed 800 mbar
-
Valves Mod. 101/AC
These valves are used on blanketed tanks. Through the valve an inert gas can be fed into the reservoir when its pressure value is below the blanketing pressure.
-
Valves Mod. 101/TV
Tightness by elastomeric O-Rings (NBR, FPM/FKM, FFKM) to minimize the leakages
MAIN FEATURES
-
Replaceable seats
-
Antifreezing pallets
The drip around the pallet avoids condensate collecting around the seat.
-
Pallet guides located above the seat
This arrangement assures a no-jamming guide of the pallet not affected by contaminant fluids as a close coupling between pallet and guides is not necessary.
-
Bird screen avoids the entering of foreign elements.
-
Setting
Any setting available, charging the pallet's dead weight load, between ± 20 mbar and ± 400 mbar. (On request higher sets).
RAMPINI s.r.l. - Via Andrej Sacharov, 17 - Limbiate (MB) - 20812
Tel. +39 02 29510899 ;
+39 02 99057839 Fax +39 02 29511081
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
P.IVA 01073520155
Web design with passion & caffeine by MV|Design