Language
LEVEL INDICATORS
mod. 1121/B - 1121/H - 1121/B - 1337
Level indicator with gauge board are recommended for their low cost, simple and rugged installation.
The level indicator consists exentially of a float connected to a counterweight by means of a st. st. cable; the cable slides on st. st. pulled mounted on PTFE bearings and housed in a gas?tight elbow.
The float is guided by means of two st. st. wires that are kept in tension by the two top tension springs.
The indicator counterweight is guided by means of two st. st. wires to avoid contact with the gauge board.
The gauge board is supplied in elements two meter long for easy handling and installation; the gauge board is marked every cm, and numbered every meter.
-
LEVEL INDICATOR Dwg. 1121/B
This level indicator is used for pressurized reservoirs, the liquid seal housings are in cast aluminium and suitable for pressure of 130 mm H2O, standard type, and 330 mm H2O, extended type.
-
LEVEL INDICATOR Dwg. 1121/H
This level indicator withcomposite liquid seal is used when the tank pressure exceeds 330 mm H2O, since the oil seal pipes can be made as long as necessary or when the oil seal housing must not be in cast aluminium.
-
LEVEL INDICATOR Dwg. 1128/B
This level indicator is used for non pressurized tanks.
-
LEVEL INDICATOR Dwg. 1337
This level indicator is used for floating roof tanks.
MATERIALS
-
Float and cable
AISI 316
-
Float and counterweight guide wires
AISI 304
-
Top tension spring
Carbon steel
AISI 30
AISI 316
With AISI 302 spring -
Elbow
Cast alluminium
Cast iron
AISI 304
AISI 316 -
Gauge board
Anodized aluminium
-
External brackets
Carbon steel
RAMPINI s.r.l. - Via Andrej Sacharov, 17 - Limbiate (MB) - 20812
Tel. +39 02 29510899 ;
+39 02 99057839 Fax +39 02 29511081
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
P.IVA 01073520155
Web design with passion & caffeine by MV|Design